Investment-Grade Fleet Transformation

Convert Operational Expense
Into Durable Asset Value

The PurePowerDrivePrestige+ framework replaces arbitrary maintenance cycles with scientific asset preservation, achieving a 94% reduction in lubricant OpEx.

94%
OpEx Reduction
+15%
Resale Premium
5%
Fuel Efficiency

The Economics of "Perpetual Fluidity"

Traditional maintenance models treat oil as a disposable consumable. PPDP+ redefines it as a long-term asset. This section visualizes the massive financial delta between the legacy "Blind Change" model and our laboratory-audited framework.

Lifecycle Cost Projection (500k KM)

Legacy Maintenance: 50 cycles @ Php 5,000 avg. | PPDP+: 1 baseline + routine lab audits.

Dynamic Savings Calculator

Total Lifecycle Savings: Php 2,350,000

Calculated over a 500,000 km operational span per unit. Excludes fuel gains.

Direct ROI

15.6x

Annualized return on initial program setup.

Sustainability

80%

Waste oil stream reduction across fleet lifecycle.

The Science of Sub-Micron Protection

Mechanical wear is not inevitable; it is a byproduct of insufficient filtration and activation chemistry. Our White Paper insights prove that standard filters fail to catch the most destructive particles.

The 2–22 Micron Cycle

SAE Technical Paper 881825 confirms that particles between 2 and 22 microns cause 60% of engine wear. Standard 20-micron filters are physically incapable of stopping these "clearance-sized" abrasives.

DM-X EP Chemistry

Unlike legacy ZDDP that requires high heat, our CaCO₃ surface-reactive additives activate at 60°C, forming a permanent calcite barrier against shear.

Laboratory Benchmarks

  • Iron (Fe) Limit: 75 ppm
  • Copper (Cu) Limit: 20 ppm
  • Lead (Pb) Limit: 15 ppm
  • Fuel Dilution: < 4.0%

Particle Breakdown & Capture Efficiency

Legacy Primary Filter
20µ Nominal
PPDP+ Bypass Filter
< 1µ Absolute

The 10-Step Operational Journey

The framework is a programmatic cycle that ensures every onboarded asset follows a scientifically rigorous path to zero mechanical wear.

Phase 1: Baseline Stabilization

Before the advanced lubrication framework is applied, the asset must reach mechanical equilibrium. This involves a full ECU interrogation, ignition reconditioning, and a "Digital Comfort Audit" to baseline NVH (Noise, Vibration, Harshness) levels.

  • ECU Fault Interrogation
  • Zone-Based Thermal Mapping
  • Chassis Block Integrity Scan

Digital Asset Governance

Transparency is the bedrock of the PPDP+ system. Every 10,000 km, lab results are pushed to the **PurePower Asset Passport**, a digital ledger that certifies the health of your engine. This isn't just maintenance; it's verifiable proof of value for future resale.

Mechanical Assurance

100% financial liability coverage for component failures.

ESG Compliance

Automated carbon footprint reduction tracking.

Asset ID: #FL-2940

Toyota Hiace Grandia

Oil Structural Vitality 92% - Optimal

Wear Metal Index

A+ Low Wear

Market Premium

+₱45k